View TQM7M4006_1983902.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module features ? very compact size ? 5 5 1.1 mm 3 . ? positive supply voltage ? 3.0 to 4.5 v. ? high efficiency ? typical gsm850 52%, gsm900 57%, dcs 51%, pcs 51%. ? cmos internal closed-loop power control. ? >55 db dynamic control range. ? gprs class 12 compatible. ? high-reliability ingap technology. ? ruggedness 10:1. ? 50 input and output impedances. ? few external components applications ? gsm handsets ? gsm wireless cards and data links package style package size: lga 5 x 5 x 1.1 mm 3 rf_in_dcs bs tx_en vbatt vramp rf_in_gsm rf_out_gsm rf_out_dcs gnd top view vcc2d vcc2g vcc3 functional block diagram logic power control dcs / pcs in vramp vbatt tx_en band select gsm 850 / 900 in dcs / pcs out gsm 850 / 900 out vcc product description the TQM7M4006 is an advanced, quad-band, ultra-compact, 3v power amplifier module designed for mobile handset applications. the module sets new standards in performance and size by employing the latest technologies in hbt power amplifier design, laminate design and cuflip? assembly technology. high- reliability is assured by ingap hbt technology. this fully integrated module, in a minimal form factor, provides a simple 50 interface on all input and output ports. it includes internal power control with wide dynamic range, and on-board reference voltage. no external matching or bias components are required. despite its very compact size, the modul e has exceptional efficiency in all bands. incorporates two highly-integrated ingap power amplifier die, a gaas high q passive matching die with a cmos controller. all die are cuflip? mounted to minimize thermal excursions. each amplifier has three gain stages with interstage matching implemented with a high q passives technology for optimal performance. the cmos controller implements a fully integrated power control circuit within the module, eliminating the need for external detection to assure the output power level. the latter is set directly from the v ramp input from the dac. the module has tx enable and band select inputs and a highly-stable on-board reference voltage. excellent performance is achieved across the 824 ? 849 mhz, 880 ? 915 mhz, 1710 ? 1785 mhz, and 1850 ? 1910 mhz bands. module construction is a low-profile overmolded land-grid array on laminate. electrical specifications parameter 850 band 900 band dcs / pcs band units min typ max min typ max min typ max gsm pout efficiency pin 34.2 44 1.5 35 52 5 8 34.2 50 1.5 35 57 5 8 32.5/32 44/44 1.5 33/32.5 51/51 5 8 dbm % dbm all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 2
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 3 absolute maximum ratings symbol parameter absolute maximum value units v bat supply voltage -0.5 to 5.5 vdc i bat dc supply current 2.5 a v ramp power control voltage -0.5 to v bat v duty cycle at max. power 50 % vswr output load 10:1 t c case temperature, operating -20 to +100 c t stg storage temperature -55 to +150 c p in input power 12 dbm esd ruggedness all ports hbm per eia/jesd22-a114 cdm per jesd22-c101 2000 2000 v v note: the part will survive over the full range specified for any individual input, while other parameters are nominal and with no rf input. operating parameters parameter conditions min. typ/nom max. units supply voltage- v bat 3.0 3.5 4.5 v supply current- i bat 1.8 a band select voltage- gsm dcs/pcs v bs - l v bs - h 0 1.2 0.5 3.0 vdc vdc tx enable input low high v tx_en - l v tx_en - h 0 1.2 0.5 3.0 vdc vdc leakage current - i l v tx_en - l, v ramp = 0.23v 1 10 a load impedances- z 0 50 ? case temperature- t c -20 +85 c
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 4 gsm850/gsm900 mode characteristics standard conditions : v batt =3.5v, v ramp =1.6v, p in =5 dbm, tx_en = h, bs = l, t c = 25c, duty cycle = 25%. parameter conditions min. typ/nom max. units frequency range- f gsm850 gsm900 824 880 849 915 mhz mhz input power for pout max.- p in 1.5 5.0 8.0 dbm output power- p out gsm850 band gsm900 band 34.2 34.2 35.5 35.2 dbm dbm output power degradation v batt =3.0v, p in =5dbm, t min < t c TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 5 dcs1800/pcs1900 mode characteristics standard conditions : v batt =3.5v, v ramp =1.6v, p in =5 dbm, tx_en = h, bs = h, t c = 25c, duty cycle = 25%. parameter conditions min. typ/nom max. units frequency range- f 1710 1850 1785 1910 mhz mhz input power for pout max.- p in 1.5 5.0 8.0 dbm output power- p out 1710 ? 1785 mhz 1850 ? 1910 mhz 32.5 32.0 33.0 32.5 dbm dbm output power degradation 1710 ? 1785 mhz 1850 ? 1910 mhz v batt =3.0v, p in =5dbm, t min < t c TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module pin out diagram gnd 1 2 3 4 5 6 7 8 91011 12 13 14 15 16 17 18 19 20 21 22 23 24 25 2627 pin symbol description 1 rfin - dcs/pcs dcs/pcs power in 2 nc no connect 3 v bs band select input 4 tx en transmit enable 5 v bat supply voltage 6 v ramp dac voltage input 7 nc no connect 8 rf in - cell/gsm gsm850/900 power in 10 v cc 2g vcc voltage input 17 rf out - cell/gsm gsm850/900 power out 18 v cc 3v cc voltage output 20 rf out - dcs/pcs dcs/pcs power out 26 v cc 2d vcc voltage input all other pins are ground all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 6
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 7 logic table operating mode band select tx enable vramp gmsk, high band high high - enabled low - disabled 0.2 to 1.6 vdc gmsk, low band low high - enabled low - disabled 0.2 to 1.6 vdc pa off x low x x- don?t care
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module test/typical application circuit: c3 rf out_lb v cc3 rf out_hb v batt v ramp tx en bs rf in_hb rf in_lb r1 c1 c2 gnd nc nc v cc2 v cc2 bill of material for TQM7M4006 power am plifier module test/application circuit 1 component reference designator part number value size power amplifier module TQM7M4006 28pin/5mm square capacitor (see note 2) c1 tbd tbd capacitor (see note 2) c2 tbd 0402 capacitor c3 15p 0402 resistor (see note 2) r1 tbd 0402 note 1: may vary due to printed circuit board layout and material note 2: value of r1, c1 vary based on base-band. c2 depends on phone noise. please see application note for further informati on. all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 8
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module pc board layout recommendations: all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 9
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module package dimensional drawings: all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 10
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module tape and reel*: *information provided as informational only. please request triquint pkg.075 for controlling documentation. module orientation carrier and cover tape physical dimensions fixed carrier and cover tape dimensions part feature symbol size (in) size (mm) cavity bottom hole diameter d1 0.059 1.50 diameter d0 0.059 1.50 pitch p0 0.157 4.00 perforation position e1 0.069 1.75 carrier tape thickness t 0.012 0.30 cover tape thickness t1 0.002 0.056 all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 11
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module module ?5x5 carrier and cover tape dimensions part feature symbol size (in) size (mm) length a0 0.207 5.25 width b0 0.207 5.25 depth k0 0.071 1.80 cavity pitch p1 0.315 8.00 cavity to perforation length direction p2 0.079 2.00 distance between centerline cavity to perforation width direction f 0.217 5.50 cover tape width c 0.362 9.20 carrier tape width w 0.472 12.00 reel physical dimensions all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 12
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module reel dimensions for 12mm carrier tape modules 5x5 13" reel part feature symbol size (in) size (mm) diameter a 12.992 330 thickness w2 0.717 18.2 flange space between flange w1 0.504 12.8 outer diameter n 4.016 102.0 arbor hole diameter c 0.512 13.0 key slit width b 0.079 2.0 hub key slit diameter d 0.787 20.0 tape length label placement product label, mfg label and esd label are placed on the flange opposite to the sprockets in the carrier tape quantity per reel: 2500 all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 13
TQM7M4006 datasheet 3v quad-band gsm850/gsm900/dcs/ pcs power amplifier module marking diagram*: *information provided as informational only. please r equest triquint mrk.TQM7M4006 for controlling documentation. white ink or laser mark line 1: triquint logo line 2: product code = 7m4006 line 3: aaxxxx = aa (2 letter vendor code)+last 4 digits of triquint assembly lot number line 4: yyww = year and work week additional information 1 this part is compliant with rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). the part is rated moisture sensitivity level 3 at 260 c per jedec standard ipc/jedec j-std-020. 1 for latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: (503) 615-9000 email: info_wireless@tqs.com fax: (503) 615-8902 for technical questions and additional information on specific applications: email: info_wireless@tqs.com the information provided herein is believed to be reliable; triquint assumes no liability for inaccuracies or omissions. triqui nt assumes no responsibility for the use of this information, and all such information shall be entirely at the us er's own risk. prices and specifications are subject to change without notice. no patent rights or licenses to any of the circuits described herein are implied or granted to any third party. triquint does not authorize or warrant any triquint product for use in life-support devices and/or systems. copyright ? 2005 triquint semiconductor, inc. all rights reserved. all specifications subject to change without notice for additional information and latest specifications, see our website: www.triquint.com may 25, 2007 (rev. f) 14

▲Up To Search▲

Price & Availability of TQM7M4006

	To Download TQM7M4006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .